The MICS chillers, MICS-N heat pumps, and MICS-DHW heat pumps with heat recovery for the production of domestic hot water are all modular units characterized by extremely high efficiency .
The availability of three partialisation steps regulated by an innovative control unit ensures previously unconceivable modulation possibilities.
Together with the oversizing of the water and heat exchanger and the use of all the latest devices, this permits these units to achieve an E.S.E.E.R. of 5.22 .

ABSOLUTE MODULARITY

MICS means modularity. All the units, and therefore chillers, heat pumps and domestic hot water production units have been originally designed for modular use.
The innovative Climaveneta approach and the exclusive MICS electronics permits the combination of units with even different power and function, such as chillers, heat pumps, and domestic hot water production devices, managed as whole unit.
In addition to improving the system's quality, all this exponentially increases the number of partialisation steps available and therefore the system's capacity for modulation and energy efficiency.

INNOVATIVE TECHNOLOGICAL CHIOCES

The advantages and elevated performance offered by MICS units were obtained as the result of the innovative technological choices that distinguish the entire conception of the unit, from the exclusive design developed to optimise unit modularity to the reduced working space required, to the presence of the electronic thermostat valve and the sequencers capable of managing up to four different units, even of different power and function, as if they were one and the same.
This solution overcomes the previously biggest limitation on the combination of units and permits the advantages of the modular approach to be exploited as never possible before.

MAXIMUM EFFICIENCY EVEN AT PARTIAL LOADS

The unit’s energy efficiency – especially at partial loads – is improved by the characteristics of the cooling circuit and the sizing of certain components.
Because they were designed expressly according to the system’s rated power, in fact, the water coils and plate-type heat exchangers are over-sized during operation at partial loads.
For the MICS 0072 units, this permits the achievement of a COP of 4.9 and an E.S.E.E.R. of 5.22.